Tractor Bridges ATV Bridges Custom built 479-243-0375
Please call us at 479-243-0375 to order your custom built tractor or atv bridge 479-243-0375. Serving the entire USA!
High Arched Tractor Bridge to Go Over a Creek
The tractor bridge shown on the right was custom designed and made out of Red Cedar. It is 24 ft long and 8 ft wide with a 2 ft high arch clearance underneath the bridge to go over a creek that floods in the spring. The arch has a total height of 3 ft. It has 5 support arched stringers and will hold up to 6,000 lbs for tractors, horses or donkeys.
Tractor Bridge with Spindle RailsThis spindle rail bridge has three supports underneath and two 2 x 12 side support arches to make the sides extra strong to support tractors. It also has 2 x 2's for the spindles and 2 x 4's for top rails. This one is 8 ft long and 6 ft wide but I can build these up to 20 feet long and probably 20 ft wide, using the same design and style.
Wide Bridge for Horses, Lawn Tractors and Golf CartsThis bridge is plenty strong enough for lawn tractors, golf carts as well as horses. This bridge takes more work, materials and thus shipping so the price is higher than my regular spindle rail bridge. To place an order please call us at one of the numbers at the top of the page or email for a price quote.
Thompsons Water Sealer - water based sealer which waterproofs the wood, or
Olympic clear sealer - water based sealer with a clear coat sealant or
Spar Urethane - an exterior oil based varnish or
Rain Forest Wood Sealer made by Earthpaint Inc. which is a non-toxic paint
product made from all natural products and safe for the environment.
12 x 5 foot Red Cedar Wooden Tractor BridgeThis 12 foot x 5 foot bridge made out of Red Cedar has posts and rails. It has three 2x12 supports with 2 x 6's for the floor planks and will hold a 2,000 lb. tractor.
Price: $1,999.00 Free shipping anywhere in the lower 48 states. Call to place an order for other sizes of this bridge.
20 Foot Wooden Tractor BridgeThis bridge is 20 feet long and 6 feet wide and made from Red Cedar. It has three solid supports that are 2 x 12's and it has 2 x 6's for the floor planks. It is built strong enough to hold a 3,000 lb tractor. It is flat except for inclines on each end for easy access for the tractor. This bridge is also available with posts and single, double or rope rails, or a longer length.
Price $3,750.00 free shipping anywhere in the lower 48 states.
Please call to place an order.
20 foot Red Cedar Flat Tractor BridgeThis bridge is 20 feet long by 4 feet wide made of Western Red Cedar with three 20 foot beams and cross bracing for extra support. It is strong enough to hold a tractor, horse or golf cart weighing up to 2,000 lbs.
Price: $3,250.00 free shipping anywhere in the lower 48 states.
30 foot Red Cedar Tractor Bridge with Posts and RailsThis bridge has posts and rails with a flat incline for easy access for a tractor. It will hold up to 2,500 lbs. It covers about 34 ft but spans a little over 30 feet. The support beams are made from two 16 foot long 2 x 12's made into one long beam using metal finger joints with an inside lap joint and a 8 ft long 2 x 12 and timber connectors between them. This bridge also has an outside lap joint and 10 stainless steel bolts holding it together along with constuction adhesive. It is also avaliable up to 39 feet long.
Please call for pricing on this bridge at one of the numbers at the top of the page.